Obloid
More tools

3D Print Timelapse Generator

Live preview
Layer 0 / 64
Outer walls Inner walls Infill Top / bottom Skirt / brim

Build video

Print timelapse

G-code or 3MF

Demo model loaded - drop your own sliced file to replace it. - 64 layers - 56 x 56 x 38 mm - 7,613 moves

Look & motion
Layers 64 top at 37.8 mm
Footprint 56 x 56 mm bed area used
Toolpath moves 7,613 extrusion segments
Infill moves 346 visible in the video

Recording plays one full build at the chosen length and saves a WebM. Vertical 9:16 is best for Reels, TikTok, and Shorts.

How the timelapse is made

  • Slice your model in any slicer (Bambu Studio, OrcaSlicer, PrusaSlicer, Cura) and export the G-code. You can also drop a sliced 3MF that contains G-code inside it.
  • The tool reads the real toolpaths, so the video shows perimeters, infill patterns like grid or gyroid, supports, and the solid top layers building up - not a fake Z-slice of a solid model.
  • The glowing top line marks the active layer, like fresh extrusion. Turn it off for a clean look, or enable the turntable for a slow rotate while it builds.
  • Everything runs in your browser and records locally to WebM, so no printer, camera, or upload is involved. Convert WebM to MP4 in any converter if a platform needs it.
  • Need to prep a model first? Cut large prints with the STL Splitter, check printability with the STL Doctor, or browse the tools hub.