Obloid
More tools

Custom Cookie Cutter Generator

Loading the geometry engine…

Customize

Cutter details

Outline
Size and wall

The rim is the flat flange you press on; it also bridges letters into one cutter. A single 0.8 mm wall rises from it to do the cutting.

3MF color
72 x 98 x 15.6 mm
About 8 g in PLA
Cuts a 34 cm edge through the dough
Prints rim-down with no supports, blade edge up

The Bambu / Orca 3MF opens print-ready: 0.2 mm layers, 2 walls, no supports, rim down. STL works in every slicer.

Printing and baking notes

  • Standard PLA is not certified food-safe. Print in a food-grade filament, or lay plastic wrap between cutter and dough. Hand-wash in cold water — PLA softens around 60 °C.
  • Print it exactly as exported: rim down, cutting edge up, 0.2 mm layers, 2 walls, no supports. A typical cutter prints in under half an hour.
  • Letters like O, A, and B cut a floating middle piece out of the dough — that is normal. Poke it out before baking or keep it for a stencil look.
  • In text mode the bottom rim bridges adjacent letters into one cutter. If a wide space splits the word, the tool warns you — reduce spacing or raise the rim width.
  • Flour the cutting edge or chill the dough if the wall drags. The 0.8 mm edge handles sugar-cookie and gingerbread dough straight off the printer.

More free tools: Nameplate, Text to 3D, Wall Planter, Spinning Top, or the tools hub.