Obloid
More tools

Phone Stand Generator

Generate a 3D printable floating phone stand in your browser. Search a model, set tilt and rest, then download STL or 3MF — no CAD software.

Loading the geometry engine…

Customize

Stand details

Phone model

Wikidata is the lookup. Type a model name and pick the closest title; the stand rebuilds from those millimetres.

Fit

Stand width is 65% of phone width. Phone rest is thickness plus 6.75 mm of hook. Base length and backrest height scale from phone height, not 1:1.

Angle and cable
3MF color
50 × 73 × 121 mm
About 12 g in PLA
Cable path open
3 free exports left Upgrade for unlimited exports.

Bambu / Orca opens centered on the plate with no supports. STL works in every slicer.

Printing notes

  • The stand prints on its floor. Keep the floating hook facing up; the phone hangs in the shelf and does not need supports.
  • Search uses Wikidata JSON (height, width, thickness, mass, connector). Camera bumps and speaker cutouts are not in that data, so they stay off the v1 model.
  • Lengthen the floor with Base length and the floating shelf with Phone rest. Close the charger hole if you want a solid shelf.

More free 3D printing tools: Hinged Box, Desk Clamp, Hanging Planter, or the tools hub.

Phone stand FAQ

How do I 3D print a custom phone stand?

Open the Phone Stand Generator, search a phone model, then download STL or 3MF. The stand is print-in-place: print it on the floor with the hook facing up. No supports and no CAD software.

Can I generate a 3D printed stand for my iPhone or Pixel?

Yes. Search Wikidata for the model title — iPhone, Pixel, Galaxy, Nothing Phone, and similar names. Height, width, and thickness fill the sliders when Wikidata has them. You can still change base length, phone rest, backrest height, and tilt after that.

Does a 3D printed phone stand need supports?

No. Print on the floor with the floating hook up. The backrest and shelf print without supports. Leave the charger hole open if you want a USB cable path, or close it for a solid shelf.

Should I download STL or 3MF?

Bambu / Orca 3MF opens print-ready, centered on the plate, with no supports. STL works in every slicer. Generic 3MF keeps the mesh and color without Bambu settings.